A sewing blog about building a functional, cohesive handmade wardrobe, one garment at a time.
Showing posts with label button-up shirt. Show all posts
Showing posts with label button-up shirt. Show all posts
Monday, May 27, 2019
Chambray Traveler Shirt
I sewed Simplicity 2246/Lisette Traveler last in 2014. It was actually one of my very first sewing blog posts. I wore both versions constantly until I got pregnant later that year and couldn't fit into them anymore. I packed them away into a bin of "skinny clothes," and there they sat until a couple of months ago, when I had finally lost enough weight to integrate them back into my wardrobe. Once again, they are my favorite shirts to wear, so I decided it was time to make a new one.
Thursday, November 30, 2017
Bonn 5: The Make It Work Shirt
Surprise, I made another Bonn (affiliate link). I'm not sorry. I'm going to make more. You'll see another before long, I'm sure. This one, though, is made out of the prettiest, softest flannel, and it's in a tunic length for extra coziness.
Funny story about the fabric. The temperature briefly dipped into the 40s a few weeks ago, and I felt miserably cold. I know, mid-40s isn't really that cold, but I am a naturally cold person, plus I'm a bit anemic, and that particular week, 40s may as well have been 10s. One night after my husband came home, I couldn't take it anymore. I told him I had to go buy flannel ASAP and I took off to Joann's at 8 p.m. I haven't bought apparel flannel there before, and my expectations were quite low, so I was really excited to find a bolt of this stuff. I can't find it on the web site, but it was one of only two 55" flannels on the shelf; most of the other apparel flannels are 41"-ish wide. Plus it was the same price as the narrower flannels, and of course it was on sale. I came home and washed and dried it three times, and was astounded when it came out of the wash pill-free. It didn't even shrink that much. So, I'm sorry I can't find it online, but if you see it in store you can buy with confidence.
I spent about an hour cutting my fabric, including lengthening the overall length by about 6" and narrowing the sleeve from the wrist to the elbow after comparing it to my Gallery Tunic pattern sleeve. I thought I was careful in my cutting, and of course, I've made this shirt four times before with great results. But somehow, my darts ended up way too low. I have no idea what happened - I must not have had the fabric completely smoothed out while cutting, but I wasn't any hastier than I normally am. When I tried on the shirt before sewing on my pockets, I was very bummed. The too-low darts really made a huge difference in the fit and it just wasn't the pattern I loved anymore.
However, I needed this flannel coziness in my wardrobe ASAP, so I just kept on trucking. I had planned to make pockets anyway, and so I decided to make them extra huge to hide my darts. I also placed them strategically to mitigate the poor-fit wrinkles as much as possible.
My cutting error wasn't limited to the dart. Somehow this shirt also just ended up way too big. Part of it was the improper dart placement, and part of it could be the way this thicker flannel behaves, but there was also just a lot of excess fabric. I also think that I made my initial full bicep adjustment too large; I will need to remedy that before I make Bonn #6.
So on this shirt, I ended up taking it in about an inch, starting about 1.5" below the bust dart all the way up through the sleeve, ending slightly above my elbow crease. The sleeves in this shirt are set in, so the adjustment was a bit sloppy as I didn't do it the "right way" by unpicking the sleeve; I just sewed straight over the seam.
I guess we can call this a "Make It Work" shirt. The bad dart makes it feel a little sloppy, but it is so comfortable that I've worn it a bunch since it came off the machine.
As an aside, I'd like to mention that we lived in Moscow, Russia, not too long ago, and I was not nearly as wimpy about cold weather then, as I am now. I think that I just used up all my cold tolerance during those two years when I forced myself to take the then-baby girls for walks in their stroller every day as long as the temperature was above 14F. And now I'm done.
Funny story about the fabric. The temperature briefly dipped into the 40s a few weeks ago, and I felt miserably cold. I know, mid-40s isn't really that cold, but I am a naturally cold person, plus I'm a bit anemic, and that particular week, 40s may as well have been 10s. One night after my husband came home, I couldn't take it anymore. I told him I had to go buy flannel ASAP and I took off to Joann's at 8 p.m. I haven't bought apparel flannel there before, and my expectations were quite low, so I was really excited to find a bolt of this stuff. I can't find it on the web site, but it was one of only two 55" flannels on the shelf; most of the other apparel flannels are 41"-ish wide. Plus it was the same price as the narrower flannels, and of course it was on sale. I came home and washed and dried it three times, and was astounded when it came out of the wash pill-free. It didn't even shrink that much. So, I'm sorry I can't find it online, but if you see it in store you can buy with confidence.
I spent about an hour cutting my fabric, including lengthening the overall length by about 6" and narrowing the sleeve from the wrist to the elbow after comparing it to my Gallery Tunic pattern sleeve. I thought I was careful in my cutting, and of course, I've made this shirt four times before with great results. But somehow, my darts ended up way too low. I have no idea what happened - I must not have had the fabric completely smoothed out while cutting, but I wasn't any hastier than I normally am. When I tried on the shirt before sewing on my pockets, I was very bummed. The too-low darts really made a huge difference in the fit and it just wasn't the pattern I loved anymore.
However, I needed this flannel coziness in my wardrobe ASAP, so I just kept on trucking. I had planned to make pockets anyway, and so I decided to make them extra huge to hide my darts. I also placed them strategically to mitigate the poor-fit wrinkles as much as possible.
My cutting error wasn't limited to the dart. Somehow this shirt also just ended up way too big. Part of it was the improper dart placement, and part of it could be the way this thicker flannel behaves, but there was also just a lot of excess fabric. I also think that I made my initial full bicep adjustment too large; I will need to remedy that before I make Bonn #6.
So on this shirt, I ended up taking it in about an inch, starting about 1.5" below the bust dart all the way up through the sleeve, ending slightly above my elbow crease. The sleeves in this shirt are set in, so the adjustment was a bit sloppy as I didn't do it the "right way" by unpicking the sleeve; I just sewed straight over the seam.
I guess we can call this a "Make It Work" shirt. The bad dart makes it feel a little sloppy, but it is so comfortable that I've worn it a bunch since it came off the machine.
As an aside, I'd like to mention that we lived in Moscow, Russia, not too long ago, and I was not nearly as wimpy about cold weather then, as I am now. I think that I just used up all my cold tolerance during those two years when I forced myself to take the then-baby girls for walks in their stroller every day as long as the temperature was above 14F. And now I'm done.
Thanks for reading, stay warm, and I'll see you next time.
SaveSave
Wednesday, November 8, 2017
Gallery hack
I made another Gallery Tunic. You'll be forgiven for thinking that it doesn't exactly look like a Gallery Tunic. But I didn't actually set out to hack this pattern. I prepped my fabric (via FabricMart, is originally from J.Crew and was described as a "cotton flannel voile") and started cutting with the full intention of making the pattern as drafted. As I was cutting, though, ideas kept coming to me. "I haven't made a shirt with a yoke for myself in awhile. It really wouldn't be difficult to add a back yoke ..." Then "I think a ruffly collar would be cool in this fabric." Finally, "Oops, I accidentally cut my front in two pieces instead of on the fold ... guess I'll just go with it."
So, yeah, it doesn't really look like a Gallery Tunic.
But on to the nitty gritty. I used the same sizing mods for this one as on my first Gallery Tunic. I cut a size 8 with an FBA, the body being widened to a 16. The sleeve is also adjusted for a fuller bicep.
The part of this shirt that I'm most excited about is the ruffle collar. I like the juxtaposition of the girly ruffle and the more masculine plaid. To make the ruffle, I used the mandarin collar piece, and then cut a ruffle 1.5 times the length of the collar by 2.25". Then I folded the ruffle in half lengthwise, gathered up the raw ends until the ruffle was the same length as the collar, and sewed it in between the two collar pieces, right sides together. Using the 1/2" seam allowance, my ruffle finished at 5/8". My collar did get stretched out somehow at the back, but since my hair is usually down, I'm not going to let it bother me too much. I do really like how it looks at the front. This fabric is very thin and drapey, so the collar flops open a little, which is what I was going for. A ruffle collar that stands too close to the neck is not a look I feel comfortable in, but a floppy ruffle, I can totally do.
Once I realized I had made a mistake in cutting the front as two pieces rather than as one on the fold, I decided to just interface and fold the front edges to the wrong side to create a button placket. The original pattern includes a 1" pleat at the bust, which then hangs free below the bust. So I made each placket 1" and topstitched them down. As you can see above, I didn't bother making buttonholes where I knew I wouldn't fasten the buttons. The placket looks like it's angled at the top but it actually is completely straight.
The back yoke was another easy modification. I lined the yoke via the burrito method and I really like the added detail of the bias-cut yoke at the back. Although I was careful in my handling, and stay-stitched all necklines, I still ended up with some stretching at the back, as you can see below. That will pretty much always be covered by my hair, though, and I can't see it, so it's ok :)
Thanks for reading, and see you next time!
So, yeah, it doesn't really look like a Gallery Tunic.
But on to the nitty gritty. I used the same sizing mods for this one as on my first Gallery Tunic. I cut a size 8 with an FBA, the body being widened to a 16. The sleeve is also adjusted for a fuller bicep.
Once I realized I had made a mistake in cutting the front as two pieces rather than as one on the fold, I decided to just interface and fold the front edges to the wrong side to create a button placket. The original pattern includes a 1" pleat at the bust, which then hangs free below the bust. So I made each placket 1" and topstitched them down. As you can see above, I didn't bother making buttonholes where I knew I wouldn't fasten the buttons. The placket looks like it's angled at the top but it actually is completely straight.
The back yoke was another easy modification. I lined the yoke via the burrito method and I really like the added detail of the bias-cut yoke at the back. Although I was careful in my handling, and stay-stitched all necklines, I still ended up with some stretching at the back, as you can see below. That will pretty much always be covered by my hair, though, and I can't see it, so it's ok :)
All in all, I'm quite happy with the way this shirt turned out. For being super-lightweight, it's quite warm, and just the slightest bit scratchy, which makes me wonder whether there is any wool content. I don't remember a wooly smell when I washed the fabric, though that was actually a couple of years ago ...
My single gripe with this shirt is the fact that it seems to highlight my bust in a way that my first Gallery does not. I wonder whether this is because of my back yoke - the shirt is a little tighter across the bust than the first Gallery. I may need to widen the bottom of the yoke a bit if I make this one again ... and like the first time I made the Gallery, I'm not certain I will try again. But you never know.
Thanks for reading, and see you next time!
Monday, September 25, 2017
Bonn #4
Another week, another Bonn (affiliate link). Don't worry, I've decided that after this one, I should probably crack open a different button-down shirt pattern as I round out my fall and winter wardrobe. But the newest horse in my stable is made out of what appears to be a cotton/linen blend shirting I recently ordered from FabricMart.
This one is a size 10DD with a 1 1/8" forward shoulder adjustmen. Both the body and the sleeves are lengthened 1.5" and point of the V neckline is an inch lower. Now, maybe because of the lower-v and the forward shoulder, the neckline isn't as open as I'd like and I notice that the back neckline is just a bit too wide. I am thinking of reducing the length of the neckline and collar (ok, maybe I will make another one sooner than I had thought).
Like on my last two Bonns, the bust darts are an inch shorter and an inch lower, and the sleeves are a size 10 with a 1.5" full bicep adjustment. I find on this one that the sleeves are a little too voluminous below the elbow. I think they look great rolled up, though (and the extra volume makes a neat roll a little bit easier).
I ended up hemming the shirt with self-fabric bias binding. I did have to redo it once, as I had forgotten to clip the seam allowance before turning it up, but once I did that, the hem fell flatter than the hems on any of my previous Bonns (though still not completely flat, grrr). I just can't seem to figure out how to hem a curved shirt tail satisfactorily.
Also, I want to note for future Masha that this shirt used up 64 inches of a 57" wide fabric.
Like my other Bonns, this one is sure to be a regular in my fall and winter rotation. It's not actually warm enough to wear it yet (and I'm totally ok with that), but I imagine I'll be reaching for it in a few weeks.
This one is a size 10DD with a 1 1/8" forward shoulder adjustmen. Both the body and the sleeves are lengthened 1.5" and point of the V neckline is an inch lower. Now, maybe because of the lower-v and the forward shoulder, the neckline isn't as open as I'd like and I notice that the back neckline is just a bit too wide. I am thinking of reducing the length of the neckline and collar (ok, maybe I will make another one sooner than I had thought).
Like on my last two Bonns, the bust darts are an inch shorter and an inch lower, and the sleeves are a size 10 with a 1.5" full bicep adjustment. I find on this one that the sleeves are a little too voluminous below the elbow. I think they look great rolled up, though (and the extra volume makes a neat roll a little bit easier).
I ended up hemming the shirt with self-fabric bias binding. I did have to redo it once, as I had forgotten to clip the seam allowance before turning it up, but once I did that, the hem fell flatter than the hems on any of my previous Bonns (though still not completely flat, grrr). I just can't seem to figure out how to hem a curved shirt tail satisfactorily.
Also, I want to note for future Masha that this shirt used up 64 inches of a 57" wide fabric.
Like my other Bonns, this one is sure to be a regular in my fall and winter rotation. It's not actually warm enough to wear it yet (and I'm totally ok with that), but I imagine I'll be reaching for it in a few weeks.
Tuesday, August 8, 2017
Bonn Fever
I've been sewing a ton the last couple of weeks in preparation for our upcoming annual beach vacation. I've made four men's short-sleeve button-down shirts, two girls' dresses andthree swim suits with another in progress. But I haven't had time to get any decent pictures. I'm hoping to remedy that with the ocean and the sand dunes as my backdrop. For now, I leave you with an overdue post about my latest Bonn Shirt (affiliate link), sewn back in May.
So it's official, I have Bonn fever. I haven't had any good button-down shirts in my wardrobe since I got pregnant with Niko and outgrew the Lisette Travelers I made in 2014. I'm rapidly filling those holes, and now I present Bonn #3!
I should note here that I tried to photograph this shirt a number of times during an overcast spring. I still haven't found a good spot for photos in or around the new house, so here's a bunch of blurry images featuring a wrinkled shirt that I refuse to iron it single time I try to photograph it. And also I wore it a lot before it got too hot.
I made this one in the long-sleeved view. I think I will probably make them all long-sleeved from now on. I like a full-length sleeve in chilly weather, and when it's not so cold, I just roll them up, so this will make them more versatile. The sleeves did end up a bit short so I will need to lengthen it about 1.5" on my pattern piece.
Again I sewed a 10DD graded to a 12 at the waist and a 14 at the hip. It fits well, though I think if I ever make this as a dress or a tunic (which I am planning to do), I should probably grade out to the 16 hip if not the 18, as I think the 14 will be too tight if I continue it all the way down.
Like on my second Bonn, my bust darts are an inch lower and an inch shorter, the shirt is lengthened 1.5" and there is a 5/8" forward shoulder adjustment. This time I also deepened the V in front by 1". I forgot to do this on the pattern, so it was an afterthought alteration after my pattern pieces had already been cut. I need to redraft my pattern to include this change. I am forever lowering necklines as I usually find a lower neckline to be more flattering on my large bust - it seems to have a minimizing effect.
The sleeves are pleated to fit them into the cuff. I didn't read the instructions carefully enough, and I stitched my pleats closed rather than basting them. It doesn't really matter, though, given my predilection for rolled up sleeves.
I am scratching my head a little on the forward shoulder adjustment. I've read a number of different tutorials on the forward shoulder, and I see two different methods - the first calls for shortening the front shoulder all the way across, and adding back to the entirety of the back shoulder. The second method, which is the one I use, calls for subtracting from the front outer shoulder edge only, leaving the neck edge as is, and drawing a diagonal line between the two. I use this method because it makes sense to me that only my outer shoulders are forward - the part attached to my neck can't really migrate forward because it is attached to my neck. But maybe I need to do it the other way, because the adjustment I made hasn't totally worked on this shirt - it still migrates backwards.
I didn't mention hemming in my other two Bonn posts, but I had quite a difficult time making the small hem on the curved shirttail. I ended up with a flippy hem on the linen one even after I redid it. This time I used a triple-stitch method that now I can't locate to link for you, and it was better, although I still find that the hem flips up after I wash it. It's really annoying, but I have had RTW shirts do that too. Does anyone have any tips there?
As it's summer now, I haven't worn the shirt much lately. But I'll be pulling it back out for heavy rotation later this fall, and I even have this fabric stashed away in the black/gray/white color (100% cotton shirting, from Walmart of all places!) to make another one. It's definitely a winner.
Thanks for reading, and see you next time!
So it's official, I have Bonn fever. I haven't had any good button-down shirts in my wardrobe since I got pregnant with Niko and outgrew the Lisette Travelers I made in 2014. I'm rapidly filling those holes, and now I present Bonn #3!
I made this one in the long-sleeved view. I think I will probably make them all long-sleeved from now on. I like a full-length sleeve in chilly weather, and when it's not so cold, I just roll them up, so this will make them more versatile. The sleeves did end up a bit short so I will need to lengthen it about 1.5" on my pattern piece.
Like on my second Bonn, my bust darts are an inch lower and an inch shorter, the shirt is lengthened 1.5" and there is a 5/8" forward shoulder adjustment. This time I also deepened the V in front by 1". I forgot to do this on the pattern, so it was an afterthought alteration after my pattern pieces had already been cut. I need to redraft my pattern to include this change. I am forever lowering necklines as I usually find a lower neckline to be more flattering on my large bust - it seems to have a minimizing effect.
The sleeves are pleated to fit them into the cuff. I didn't read the instructions carefully enough, and I stitched my pleats closed rather than basting them. It doesn't really matter, though, given my predilection for rolled up sleeves.
I am scratching my head a little on the forward shoulder adjustment. I've read a number of different tutorials on the forward shoulder, and I see two different methods - the first calls for shortening the front shoulder all the way across, and adding back to the entirety of the back shoulder. The second method, which is the one I use, calls for subtracting from the front outer shoulder edge only, leaving the neck edge as is, and drawing a diagonal line between the two. I use this method because it makes sense to me that only my outer shoulders are forward - the part attached to my neck can't really migrate forward because it is attached to my neck. But maybe I need to do it the other way, because the adjustment I made hasn't totally worked on this shirt - it still migrates backwards.
I didn't mention hemming in my other two Bonn posts, but I had quite a difficult time making the small hem on the curved shirttail. I ended up with a flippy hem on the linen one even after I redid it. This time I used a triple-stitch method that now I can't locate to link for you, and it was better, although I still find that the hem flips up after I wash it. It's really annoying, but I have had RTW shirts do that too. Does anyone have any tips there?
As it's summer now, I haven't worn the shirt much lately. But I'll be pulling it back out for heavy rotation later this fall, and I even have this fabric stashed away in the black/gray/white color (100% cotton shirting, from Walmart of all places!) to make another one. It's definitely a winner.
Thanks for reading, and see you next time!
Wednesday, May 24, 2017
Seersucker Bonn Shirt
I made another Bonn Shirt (affiliate link)! This one is in cotton seersucker from Fabric Mart, purchased about a year ago. Like my last Bonn, this one is a 10DD graded to a 12 waist and a 14 hip. I also shortened the darts by 1" and moved them down 1", and fixed the botched forward shoulder adjustment I had made on my first Bonn. I left the cuffs off the short sleeves because that is an area on my body that needs no extra bulk.
When I finished the shirt, the expanse of hot-pink gingham seemed to cry out for some breaking up. So I cut out a patch pocket on the bias. I considered cutting two pockets but thought it would make the shirt look campier than I wanted. I'm still pondering adding the second pocket, though. I did a 1.5" full bicep adjustment on the short sleeve piece (since I had had to do on the long-sleeve piece), and the sleeves ended up way too big at the opening. I didn't feel like ripping and recutting a sleeve, so for this casual shirt, I made a 1" pleat on each sleeve hem, topstitched the pleat down and called it good. It looks fine, but it actually restricts my movement - when I raise my arms the whole shirt comes up. I should have taken out the excess under the arm, and actually, I can still do that pretty easily since I pleated the sleeves after I had already hemmed them.
I can get this shirt on just fine with the front done up, so I skipped buttonholes and sewed my buttons right on. I also didn't sew a button at the top. This allows the top to open up a slight bit but still keeps me covered up. I think I'm going to try deepening the v just a little bit on my next version.
There is no shaping on the back of this shirt - no yoke or darts. I could see putting fisheye darts into the back in a more refined fabric, but in this seersucker, the loose fit back there will make for a very cool top for our sweaty summers.
I'll definitely be packing it on vacation! Do you have any favorite vacation me-mades?
Tuesday, May 16, 2017
Bonn Shirt
I made a shirt. I've been eyeing the Bonn Shirt pattern (affiliate link) since it came out, and I finally bought the PDF a couple of weeks ago. I love everything about this pattern - the shape of the open neckline, the mandarin collar, and the shirt-tail hem.
Obviously, I should have made a muslin.
I also knew that I was going to have to do a full bicep adjustment on the sleeve (something I've never successfully done before), so I measured my arm and the pattern piece and used this tutorial to figure out the rest. I ended up doing a 1.5" adjustment to the size 10 sleeve.
I am 5'8", so I lengthened the top 1.5". I did end up shortening the shirt in front before I hemmed it (but this was probably also because of the way I messed up the shoulder adjustment). I'm really quite happy with the fit, aside from the shoulder issue, though you can see in this photo that the dart isn't quite in the right place - the dart point is right on top of my bust apex, and the dart needs to be moved down about an inch. I've made adjustments on my pattern piece to fix this for next time.
The fabric is a gorgeous linen I bought from Fabric Mart three years ago. Those of you who know Fabric Mart know that, if you wait a few days, whatever you have your eye on will go on sale. This is a rare fabric that I bought at full price because I was afraid it was going to sell out before the next sale. I used some of it to make a dress for Z last year, and this shirt took out the rest of the cut. And I feel completely satisfied with that - it's like the fabric met its perfect destiny in this pattern.
I think this shirt will get a workout with my skinny jeans, but I also wore it yesterday with a skirt, and I like it with shorts as well. I don't know why I waited so long to buy this pattern, but I know I'll be using it again and again. As with the other Itch to Stitch patterns I have tried, the drafting and instructions are very good.
See you next time!
SaveSaveSaveSaveSaveSave
Wednesday, December 28, 2016
Alberta Street Traveler
I sewed this top early this fall, took some photos and wrote a blog post draft. Then I wore it twice, decided I hated it, balled it up and threw it into my closet. Today I came upon it again while searching for something to wear with my new Alberta Street Skirt. The sun was out, so I took a few new photos. I wore it all day and got several compliments. My outlook on the blouse completely changed, I figured it was time I slap it up on the blog.
This is a modified Lisette Traveler. I made three of them in 2014 but none of those fit me anymore. So I had to refit the pattern from scratch.
What you see here is the result of many hours of work. I made a number of flat pattern adjustments as I was redrafting the pattern. I shortened the pattern, leaving a longer shirt-tail on the back, which I really like. I cut a size 14 shoulder with a large FBA. I can't remember how much but my darts are huge. (If I make this again I should probably split them and rotate one someplace else.) I also moved the dart so that it pointed upwards - I hate horizontal darts. Then I graded out to a 20 at the hip. I drafted in the size 22 armscye as I was planning to use the 22 sleeve - as it turns out, I had to take in the sleeve seams 1/2" each so I think I can go down to a 20. I also did a forward shoulder adjustment - or so I thought - and adjusted the sleeve to match using this tutorial. And this was all before I even cut into my muslin.
I sewed up the muslin and one sleeve, and noted that I needed a bit more room in the hips. I also decided that I would like to alter the neckline a bit. I really have no idea what I did, and will not be able to replicate it, as I didn't make any notes, so I'll just show you a close-up. It's kind of a v-neck mandarin collar, if there exists such a thing.
Then, rather than making a second quick-and-dirty muslin, I decided to do a "wearable" muslin using that thrifted Kaffe Fasset quilting cotton I previously used for my Tulip dress. In my first draft of this post, I wrote, "this cotton really is much lighter and drapier than other quilting cottons I've used; and has more of a poplin shirting-esque hand." After several wears, I need to come clean and tell you that that is simply not true. It's a nice quilting cotton, but it's still a quilting cotton, lacking the subtle drape that is necessary, in my opinion, to achieve a well-fitting button-down shirt.
I cut out the shirt, taking care not to position any blooms at my bust points, but other than that not paying much attention to pattern placement. When I went to set in the sleeves I had major problems with too much ease in the back of the sleeve. I had adjusted the sleeve heads forward, but I think I forgot to adjust the actual shoulders of my pattern. I redistributed the sleeve cap around the armscye, effectively undoing the sleeve adjustment, and they went in fine. I also put in two fish-eye darts after I sewed the shirt together; just pinching out until I figured out how wide to make them.
Now that I'm wearing the shirt, I see that I really do need that forward-shoulder adjustment. This is another reason that the shirt ended up in the corner of my closet - I hate having to shrug my clothes back throughout the day. Though today I wore it tucked into a skirt, and I didn't have to shrug it back nearly as often. Now that I have paired the two garments, I will probably wear the shirt - as part of this outfit - more regularly.
The skirt is Sew House Seven's Alberta Street Skirt. I've had my eye on this pattern for quite some time, and then I won it in a giveaway. This thrifted denim version is my first. The fabric isn't showing up very accurately in the photos - it is a relatively uniform medium-blue denim.
As dictated by my measurements, I sewed a straight size 16. I initially sewed the side seams with 3/8" seam allowances because I was skeptical about the negative ease for a non-stretch fabric. But the skirt was definitely too big. So I resewed from the hem to the mid-hip with the prescribed 5/8" allowance. I left the smaller allowances in the upper hip and waistband. When I am standing, the waist seems a little loose. But when I sit down, my fluff shifts and fills everything out. If the waist were tighter, I think it would be uncomfortable to sit in. Or maybe it would just ride up. Either way, I hate that.
The pattern went together quickly and easily. My only head-scratching moment was when I was instructed to backstitch the darts at their points; this runs counter to the hand-finishing instructions i have encountered on every other pattern involving darts that I've ever sewn. I ended up backstitching as instructed because I thought maybe that would be a sturdier dart finish on my heavy denim. There isn't any bubbling that I can see, so I guess it's ok. Also, I love the double darts.
The pockets are what drew me to the pattern in the first place, only I thought they were interesting seam lines. As pockets, they're not super-useful because the skirt is so fitted. They're nice and big but anything you put in them is visible against your leg. I didn't think to reinforce the diagonal openings of the pockets, but I think it is advisable so that they don't stretch out of shape with wear.
It's a great pattern, and this denim version has brought my wardrobe back to life as it goes with just about everything! I've already sewn a second one which I will wear for Christmas (Orthodox Christmas isn't until next week so we haven't celebrated yet!). Look for a blog post on that one soon.
This is a modified Lisette Traveler. I made three of them in 2014 but none of those fit me anymore. So I had to refit the pattern from scratch.
What you see here is the result of many hours of work. I made a number of flat pattern adjustments as I was redrafting the pattern. I shortened the pattern, leaving a longer shirt-tail on the back, which I really like. I cut a size 14 shoulder with a large FBA. I can't remember how much but my darts are huge. (If I make this again I should probably split them and rotate one someplace else.) I also moved the dart so that it pointed upwards - I hate horizontal darts. Then I graded out to a 20 at the hip. I drafted in the size 22 armscye as I was planning to use the 22 sleeve - as it turns out, I had to take in the sleeve seams 1/2" each so I think I can go down to a 20. I also did a forward shoulder adjustment - or so I thought - and adjusted the sleeve to match using this tutorial. And this was all before I even cut into my muslin.
I sewed up the muslin and one sleeve, and noted that I needed a bit more room in the hips. I also decided that I would like to alter the neckline a bit. I really have no idea what I did, and will not be able to replicate it, as I didn't make any notes, so I'll just show you a close-up. It's kind of a v-neck mandarin collar, if there exists such a thing.
Then, rather than making a second quick-and-dirty muslin, I decided to do a "wearable" muslin using that thrifted Kaffe Fasset quilting cotton I previously used for my Tulip dress. In my first draft of this post, I wrote, "this cotton really is much lighter and drapier than other quilting cottons I've used; and has more of a poplin shirting-esque hand." After several wears, I need to come clean and tell you that that is simply not true. It's a nice quilting cotton, but it's still a quilting cotton, lacking the subtle drape that is necessary, in my opinion, to achieve a well-fitting button-down shirt.
I cut out the shirt, taking care not to position any blooms at my bust points, but other than that not paying much attention to pattern placement. When I went to set in the sleeves I had major problems with too much ease in the back of the sleeve. I had adjusted the sleeve heads forward, but I think I forgot to adjust the actual shoulders of my pattern. I redistributed the sleeve cap around the armscye, effectively undoing the sleeve adjustment, and they went in fine. I also put in two fish-eye darts after I sewed the shirt together; just pinching out until I figured out how wide to make them.
Now that I'm wearing the shirt, I see that I really do need that forward-shoulder adjustment. This is another reason that the shirt ended up in the corner of my closet - I hate having to shrug my clothes back throughout the day. Though today I wore it tucked into a skirt, and I didn't have to shrug it back nearly as often. Now that I have paired the two garments, I will probably wear the shirt - as part of this outfit - more regularly.
The skirt is Sew House Seven's Alberta Street Skirt. I've had my eye on this pattern for quite some time, and then I won it in a giveaway. This thrifted denim version is my first. The fabric isn't showing up very accurately in the photos - it is a relatively uniform medium-blue denim.
As dictated by my measurements, I sewed a straight size 16. I initially sewed the side seams with 3/8" seam allowances because I was skeptical about the negative ease for a non-stretch fabric. But the skirt was definitely too big. So I resewed from the hem to the mid-hip with the prescribed 5/8" allowance. I left the smaller allowances in the upper hip and waistband. When I am standing, the waist seems a little loose. But when I sit down, my fluff shifts and fills everything out. If the waist were tighter, I think it would be uncomfortable to sit in. Or maybe it would just ride up. Either way, I hate that.
The pockets are what drew me to the pattern in the first place, only I thought they were interesting seam lines. As pockets, they're not super-useful because the skirt is so fitted. They're nice and big but anything you put in them is visible against your leg. I didn't think to reinforce the diagonal openings of the pockets, but I think it is advisable so that they don't stretch out of shape with wear.
Sunday, April 20, 2014
Dotted Traveler
I hope everyone had a wonderful Easter. I took breaks from both sewing and blogging during Holy Week - it was hard to unplug at first, but I feel rejuvenated after a week of prayer and reflection and the joy of Sunday!
So this week I'll be blogging a few things I made before KCW but never posted.
I made another Lisette Traveler shirt a couple weeks ago. I used the same modifications that I made for my second Traveler back in January - size 14+FBA with two fisheye darts in the back and French darts in the front. I did forget that I had wanted to do a forward shoulder adjustment on this shirt - I need one as I keep shrugging it back to the front. I have to remember to do that next time.
I used a gray Swiss dot from Fabric.com, and used the mandarin collar. It's a very light and comfortable shirt to throw on. I do wish I had chosen a color other than gray in the Swiss dot - this would have been nice in a brighter hue. I have to keep that in mind next time I fabric shop.
I did not choose my topstitching thread well - it shows up more than I would like. And this fabric is so nice and light, but it wrinkles like crazy.
Not much else to say about this make - I love the pattern and will make it a fourth time, I'm sure.
So this week I'll be blogging a few things I made before KCW but never posted.
I made another Lisette Traveler shirt a couple weeks ago. I used the same modifications that I made for my second Traveler back in January - size 14+FBA with two fisheye darts in the back and French darts in the front. I did forget that I had wanted to do a forward shoulder adjustment on this shirt - I need one as I keep shrugging it back to the front. I have to remember to do that next time.
I used a gray Swiss dot from Fabric.com, and used the mandarin collar. It's a very light and comfortable shirt to throw on. I do wish I had chosen a color other than gray in the Swiss dot - this would have been nice in a brighter hue. I have to keep that in mind next time I fabric shop.
I did not choose my topstitching thread well - it shows up more than I would like. And this fabric is so nice and light, but it wrinkles like crazy.
Not much else to say about this make - I love the pattern and will make it a fourth time, I'm sure.
Tuesday, January 28, 2014
Lisette Traveler, #1 and #2
I bought this pattern at least a year ago. I had my eye on the mandarin-collared tunic, View B. Last month I finally sewed it. I used a plaid cotton shirting from Fabric.com. My measurements put me at a size 18, but I knew I wouldn't be happy with as much ease as was built into the pattern. I measured the flat pieces across the bust and waist and decided to take a chance on the size 16 without alterations.
It was actually a pretty good fit! It is just a bit too big in the shoulders, which at first I didn't think was a big deal.
Check out that shoulder fit. Isn't it much more flattering than the wider shoulder of the size 16? I love it!
I only have one issue with the pattern, and that is the fact that the View A collar is all one piece. I have never sewn a two-piece collar but I imagine it would lie better. I'm thinking I'll make another shirt using the mandarin collar though.
It was actually a pretty good fit! It is just a bit too big in the shoulders, which at first I didn't think was a big deal.
Even so, I decided to try a size 14 + FBA for my second one, and also to try the View A collar. After doing the FBA and reading a little about bust darts online, I decided to try lowering and pivoting the dart, so that it points up a bit more. I don't really like the look of horizontal bust darts, but until now, I didn't realize there were other options.
World. Changed.
Check it!
I will be doing all of my darts like this from now on. Love it!
As I was cutting, I decided on a whim to shorten the tunic into a shirt. I took 6" off the hem, leaving it long enough to cover my bum in low-rise jeans. The fit was good already. But, as I like my button-downs a little more close-fitting, I added two fish-eye darts in the back.
Check out that shoulder fit. Isn't it much more flattering than the wider shoulder of the size 16? I love it!
I only have one issue with the pattern, and that is the fact that the View A collar is all one piece. I have never sewn a two-piece collar but I imagine it would lie better. I'm thinking I'll make another shirt using the mandarin collar though.
Love.
Subscribe to:
Posts (Atom)






















































